Tyre Pressure

Guys what's the tyre pressure you've been pumping?
I've noticed at the side of the door I states:-
1-3pax 210 front 240 rear
4-5pax 240 front 320 rear

Betul ka? Seems a lot wei...sorry lastime my kelisa only one tyre pressure..

err.. i have not pump air yet. hahaha.

dem.. got to go check liao .. kekeke

i am quite comfortable with 190 at the back and 220 in front. give it a try and see.

190 at the back 220 in front.

Got it.

Thanks for the info.

that depends on your car usage as well, if you have alot of "gears" at the back, then you might want to pump it up a little. the front is heavy plus front wheel drive, so pump up the front is okay too.

for me, 190-220 is nice when coming down from genting..

Usually is just me in the car. hahahaha

Only time it was maxed out was during CNY. hahaha. Boot fully packed to the brim with shandy, beer, stout, biscuits, yok kon, bags and stuff. kekekeke

220kpa front & 190kpa rear is a ideal setup provided ur car is running light/nobody sitting behind or carrying load. This was the setup i ran for the genting trip. But now i've raised the pressure a little in front to 225kpa & much higher 205kpa rear. No load at the rear & it feels quite good too during my test at karak highway.

its all about trial and error. try it with different settings, feel the body roll on the road then tune again..i did 200 rear for genting run, it was kinda floaty and sliding when taking corners..so dropped to 190 for the 2nd run and it was better..

32psi front and 28 psi rear for me. Solo, it steers neutral but very quick and responsive.
even with wife and two kids, it felt comfortable and responsive.
Steering is kinda light and no feedback at all. Is it electric assist?

around 28-32psi is better, just adjust it and try until u feel which setting is better for your driving style...

wow... this makes me remember that i never really checked the tyre pressure since i got the ride... need to go back and check it!!!

I checked it immediately upon delivery. It was pumped up to 38 psi all round.
So much for PDI...

sh*t man... i still forgot to check my tyre pressure!!!!

after 1st inspection, the mechanics pump 300 in all tyre...after that bring to the my trusted allignment shop, they pump in 220 front and 200 rear... now, I stick to this setup (almost 'makan' accord 2.2 in east-west hiway...hehehe)

if im not mistaken... the 300kpa is a standard for CBU cars brought in. My other car when I got it from Japan oso same thing... the pressure was 300kpa

I haven't gotten my car yet.... but I would believe the rear pressure should be higher... especially for a front wheel drive car... this is to balance out the understeer characteristic of fwd...

To reduce understeer, you would want LESS pressure in the rear

hehe... you sure about that? I'm pretty sure it's the other way round....

Anyone gone for low profile tyres yet? What do you use if you're on 205/40/17 for example?

Barbarian wrote:hehe... you sure about that? I'm pretty sure it's the other way round....

Google it...I have the chart but dun know how to post it.

i put 225kpa in front and 220kpa behind. most of the time i drive alone but i do bring passengers sometimes.

[img][Url=http://img145.imageshack.us/i/overundersteeradjustment.jpeg/][/img]

Still cannot post pics, the right click don't work for copy and paste function.
[You must be registered and logged in to see this image.]

Dear Klimal, kindly use the Ctrl C for copy and Ctrl V for Paste.

The code I am viewing that you have pasted is incorrect and the URL I have helped you check is not a valid URL link.

I have previously created a step by step instruction on how to post the images onto FCM,The area where u went wrong is you just only have to paste the "Direct" image URL code into the upload an image icon.

Hope this helps.

Hi members reading this, feel free to chip in and help Mr Klimal as we are a family here

Cheers

Finally managed it.
Thank you very much Admin..is it Jason?

klimal wrote:Finally managed it.
Thank you very much Admin..is it Jason?

Indeed its Me Have Fun Klimal, anything you may PM me if u need help.

Cheers